saying hi

[Donahue]

hey guys, im new to the forum. i figured i would say hello in here, because this is probably one of the few sections i might know anything about. my name is devin, im 24 and i wheel an 89' 2dr blazer.

http://krazyk5.com/albums/7-4-07/DSC01101.sized.jpg

as you can tell, i like to play in the rocks. currently my blazer looks like this:
http://krazyk5.com/albums/s10-buildup/PIC_0385.sized.jpg
http://krazyk5.com/albums/s10-buildup/PIC_0440.sized.jpg

its getting 3/4t axles, 38's, and dual cases. im a little stalled at the moment, ive got a lot on my plate right now. but it will get done and out of the garage soon enough.

:D

[Tinner]

Thats what Iwant to dowith my Zr2 is put in 3/4 ton rear and transfer case then go with the stout LS-2 427 corvette motor. I want all of the accesories to work also. Want it to look stock from the outside until you decide you want to terminate someone.

[Donahue]

Thats what Iwant to dowith my Zr2 is put in 3/4 ton rear and transfer case then go with the stout LS-2 427 corvette motor. I want all of the accesories to work also. Want it to look stock from the outside until you decide you want to terminate someone.
why the t-case? and, do you know how big the 3/4t axle is? mine is figgin huge, and it would be obvious it was not stock. but if you used a cab and chassis 14b, it would be 63" wide, and you could convert it to sua and that would get you close.

[mreed]

Man that looks like a fun truck! To work on and play in the rocks with.

[Donahue]

thanks. it is really fun. i had almost no money in it when it looked like the first picture.

[daryl]

Welcome to the site. It will interesting to see your truck progress.

[mrhappy85]

Looks more like a "No DOor" Blazer to me :D


I'm not going quit as retardedly strong with my axle choice,

44's, with 33" MTZ's will be plenty enough for a 155hp 2.8L.

Keep us Posted!!!

[Ron]

Welcome to the site.

[Donahue]

Looks more like a "No DOor" Blazer to me :D


I'm not going quit as retardedly strong with my axle choice,

44's, with 33" MTZ's will be plenty enough for a 155hp 2.8L.

Keep us Posted!!!
yeah, ive got doubled t-cases and i dont trust semi floating axles.

[Rinkrat456]

and i dont trust semi floating axles.Your loss.

[Rob]

...LS-2 427 corvette motor...

The LS2 is a 6.0L, not the 7.0L (LS7 427).

PS: Sorry for the thread wh0ring.

[Donahue]

Your loss.not really