got boost

[vic]

i have a 2.2 and i have a turbo and 3 inch stainless how would i go about doing this all were do i get an echaust manifold and stuff like that and yes i no its a 4 cyl i dont need any one to say y are u doing this i just want to no how soo i can do it thanks

[nickr5208]

im confused by your question. Are you trying to install a 3" exhaust?

also btw how is the turbo on the 2.2l, its pretty rare but different i kinda like it

[s10350racer]

i didnt think they make a kit for it so you will probably have to make a lot of stuff yourself. and theres a lot more to it than just running the air pipes.

[Injected]

i have a 2.2 and i have a turbo and 3 inch stainless how would i go about doing this all were do i get an echaust manifold and stuff like that and yes i no its a 4 cyl i dont need any one to say y are u doing this i just want to no how soo i can do it thanks
As your first post you have taken on a huge goal, creating your own 2.2 turbo kit. It's not rocket science, but you will need fabricating skills and tools in order to complete the kit. I'm sure that you will find that there are lots of people, myself included, will help you as much as we can from here. As s10350racer posted, it's a bit more that running air pipes, but piping is the most difficult part (besides tuning the damn thing, but one thing at a time). If you get the air done, then you have oil and cooling (if it is a water cooled turbo) and the previously mentioned fuel tuning. If you are still up to the task, let us know.

[postalpop]

If you do a search on s10forum you will find all the information and pics I have.
Do a search for username 'blades', or any topic containing the word 'turbo', looking
specifically in the 2.2 forum starting around June or July of 2002.
I appologize for the brief reply here, but I just don't have the time to explain
the entire project again. I wrote several lengthy descriptions and answered many
specific questions on that forum during that time, so the information you find there
will likely be more complete than if I were to try explaining it again. Feel free
to contact me if you have any specific questions that you can't find the answer
to there. Also, use xsr76a@yahoo.com because I am in the process of abandoning this
e-mail address (too much spam), and don't check it very often.

Bill
I was asking the same thing and I found Mr. Bill blades Truck.
Postalpop