best way to lower

[Michael Loveday]

what is the easiest way to lower the front end of a s10, coils or spindles and by easiest i mean the least # of people

[Dimemaster]

Spindles or springs doesn't matter. Either only takes one person. Spindles are best for a 2-inch drop, springs for 1-inch drop. Springs and spindles for anyhing else. It has nothing to do with installation difficulty and everything to do with drivability and safety.

[Sam]

If you only want to do a 2" drop, go with spindles. it will be tons easier than a 2" coil drop, and it's a better drop.

[i0kepa]

dropping with spindles allows for easier alignment issues too.

[jines1284]

On my first atempt to lower my truck I went two week before I got my alignment and after switching the front tires with the back and then four bald tires. I had to pay an aditional 140 for two new front tires. But yeah spindles you could have it done in a few hours. Go beltech the instalation instructions were awsome.

[s10mafia50]

the 2" spindles look fairly easy to install, but i wouldnt know since mine were installed before i purchased the truck. Anyways, I get a nice ride outta the front end.
Andrew

[jusbo]

Go Here...http://www.blazinlow.com/drop/
Hope that helps...it did for me.

[???bags???]

to chage coils the spindles have to come off so if you only want a 2" drop then spindles are the way to go and if you ever bag it you will need 2" spindles to lay frame up front