PDA

View Full Version : does a 96 s10 blazer have the same bolt pattern as 95 s10 4x4

2fast4u
10-19-2005, 04:37 PM
the title asks the whole question
Old Man
10-19-2005, 05:59 PM
5x4 3/4!!!!!
bill 4.3L 5spd
10-19-2005, 06:57 PM
5x4 3/4!!!!!

he means yes

and moved
Old Man
10-19-2005, 07:06 PM
I wasnt moved when I said what I did!!
Mike D
10-19-2005, 07:09 PM
what wasnt moved? Is the blazer 4WD. If it helps The stock rims From my 2WD s10 fit my brothers 4wd blazer No problem. Im not sure if 4wd rims will fit a 2wd though (backspacing might be a problem)
Old Man
10-19-2005, 08:10 PM
Nope, 4x4 wont fit a 2 wheel, WAY TOO much backspacing. But really most of GM vehicles do use 5x4 3/4!!
2fast4u
10-19-2005, 09:36 PM
well these rims (http://seattle.craigslist.org/pts/98769614.html) are what im lookin at getting they say it has a universal bolt pattern 5x4.5 and 5x4.75 look at them and tell me if u think thell fit
nickr5208
10-19-2005, 10:40 PM
be very careful with backspaciing on 4x4 rims and camaro/corvetter rims with the backspacing i bought a set of irocs and the backspacing was to deep...its still 5x 4 3/4